Ukrainian Journal of Forest and Wood Science

Anatomical study of Shorea species in Sri Lanka

Chaminda Muthumala, Thilan Mudalige, Faiz Marikar
Download article
Abstract

The six Shorea species native to Sri Lanka Beraliya dun (S. disticha), Navada dun (S. stipularis), Dun (S. zeylanica), Yakahalu dun (S. trapezifolia), Yakal dun (S. astylosa), and Thiniya dun (S. congestiflora) are commercially valuable timbers within the Dipterocarpaceae family, yet their close morphological resemblance creates substantial difficulties in accurate species-level identification across field, trade, and processing contexts. This study aimed to establish reliable wood anatomical criteria for distinguishing these six Shorea species through microstructural analysis and its quantitative relationship with timber density. Permanent sections in transverse, radial, and tangential planes were prepared and examined under light microscopy, with vessel diameter and ray dimensions measured using Micrometrics SE Premium imaging software, while timber density was determined through the water displacement principle. All six species exhibited solitary and multiple vessel arrangements, with mean vessel diameters differing considerably across taxa, providing a primary basis for microscopic discrimination. Ray structure ranged from uniseriate to multiseriate configurations, with measurable variation in ray height and width offering additional diagnostic value. Axial parenchyma patterns including paratracheal and apotracheal forms differed consistently among species, reinforcing anatomical boundaries at the cellular level. A statistically significant negative correlation was identified between wood density and vessel diameter, indicating that species with greater density characteristically develop narrower conducting elements. By integrating vessel arrangement, ray morphology, parenchyma distribution, and density values, a dichotomous identification key was constructed that successfully and unambiguously separates all six taxa. The anatomical framework and dichotomous key developed in this study offer timber inspectors, foresters, and wood processing industries a scientifically grounded, practical tool for the accurate identification of Sri Lankan dun timbers in both raw and processed forms

Keywords

anatomical features; wood density; wood anatomy; timber identification; vessel characteristics; microscopic features; dichotomous key

Suggested citation
Muthumala, Ch., Mudalige, T., & Marikar, F. (2026). Anatomical study of Shorea species in Sri Lanka. Ukrainian Journal of Forest and Wood Science, 17(1), 43-56. https://doi.org/10.31548/forest/1.2026.43
References
  1. Anuruddha, M.C., Morimoto, T., Gamage, S., & Marikar, F. (2025). Factors affecting fuel-wood consumption in the central highlands and conservation drawbacks to the montane forest system in Sri Lanka. Discover Forests, 1, article number 45. doi: 10.1007/s44415-025-00045-w.
  2. Atapattu, K., Perera, H., Kathriarachchi, H., & Gunawardena, A. (2022). Abundance and spatial distribution analyses of Stemonoporus moonii Thwaites (Dipterocarpaceae) – a critically endangered species endemic to Sri Lanka. Journal of Threatened Taxa, 14(1), 20426-20432. doi: 10.11609/jott.6970.14.1.20426-20432.
  3. Baas, P., et al. (2004). IAWA list of microscopic features for softwood identification. IAWA Journal, 25(1), 1-70.
  4. But, G.W.C., Wu, H.Y., Siu, T.Y., Chan, K.T., Wong, K.H., Lau, D.T.W., & Shaw, P.C. (2023). Comparison of DNA extraction methods on CITES-listed timber species and application in species authentication of commercial products using DNA barcoding. Scientific Reports, 13, article number 151. doi: 10.1038/s41598-022-27195-7.
  5. Cabral, J.P., Kafle, B., Subhani, M., Reiner, J., & Ashraf, M. (2022). Densification of timber: A review on the process, material properties, and application. Journal of Wood Science, 68, article number 20. doi: 10.1186/s10086-022-02028-3.
  6. Chalise, P., Paneru, Y.R., & Joshi, L. (2022). Anatomical study of Shorea robusta Gaertn. Journal of Plant Resources, 20(1), 113-120. doi: 10.3126/bdpr.v20i01.56599.
  7. Chathushaki, I.G., Muthumala, C.K., Arunakumara, K.K., & Marikar, F.M. (2025). An assessment of wood properties of lesser-known timber species in Sri Lanka. Bulletin of the Transilvania University of Brasov. Series II: Forestry, Wood Industry, Agricultural Food Engineering, 18(2), 83-94. doi: 10.31926/but.fwiafe.2025.18.67.2.6.
  8. Convention on Biological Diversity. (1992, June). Retrieved from https://zakon.rada.gov.ua/laws/show/995_030#Text.
  9. Dormontt, E.E., et al. (2015). Forensic timber identification: It’s time to integrate disciplines to combat illegal logging. Biological Conservation, 191, 790-798. doi: 10.1016/j.biocon.2015.06.038.
  10. Duffy, A.J. (2024). The “nature” of vertical school design – An evolving concept. Architecture, 4(3), 730-744. doi: 10.3390/architecture4030038.
  11. Erwin, A.F., Budi, A.S., Husein, N., & Yustika, E. (2025). Wood anatomical identification of Dipterocarpus humeratus Sloot and Dipterocarpus confertus Slooten from East Kalimantan. IOP Conference Series: Earth and Environmental Science, 1562, article number 012032. doi: 10.1088/1755-1315/1562/1/012032.
  12. Fajardo, A., Piper, F.I., & García‐Cervigón, A.I. (2022). The intraspecific relationship between wood density, vessel diameter and other traits across environmental gradients. Functional Ecology, 36(7), 1585-1598. doi: 10.1111/1365-2435.14069.
  13. Helmling, S. (2020). Identification of mixed tropical hardwood (MTH) by characteristic morphological features – a contribution to species protection (Doctoral dissertation, University of Hamburg, Hamburg, Germany).
  14. Laskowska, A., Majewska, K., Kozakiewicz, P., Mamiński, M., & Bryk, G. (2021). Case study of anatomy, physical and mechanical properties of the sapwood and heartwood of random tree Platycladus orientalis (L.) Franco from South-Eastern Poland. Forests, 12(7), article number 925. doi: 10.3390/f12070925.
  15. Malik, N., Edwards, D., & Freckleton, R.P. (2025). Comparative analyses and phylogenetic dependence in traits and trends of the Dipterocarpaceae. Ecology and Evolution, 15(1), article number e70784. doi: 10.1002/ece3.70784.
  16. Musa, A., Aminah, N.S., Kristanti, A.N., Amalia, R.T., Thant, T.M., Rajasulochana, P., & Takaya, Y. (2024). Phytochemical and pharmacological profile of genus Shorea: A review of the recent literature. Heliyon, 10(2), article number e23649. doi: 10.1016/j.heliyon.2023.e23649.
  17. Muthumala, C.K., De Silva, S., Alwis, P.L., Arunakumara, I.K., & Marikar, F.M. (2025). Assessment of quality parameters of finger-jointed timber products: A review. Bulletin of the Transilvania University of Brasov. Series II: Forestry, Wood Industry, Agricultural Food Engineering, 18(2), 65-82. doi: 10.31926/but.fwiafe.2025.18.67.1.5.
  18. Muthumala, C.K., De Silva, S., Alwis, P.L.A.G., & Arunakumara, K.K.I.U. (2022). Strength index-based timber classification of Sri Lankan timbers and potential for finger-joint production from wood off-cuts. International Wood Products Journal, 13(4), 263-271. doi: 10.1080/20426445.2022.2117929.
  19. Ohashi, S., Okada, N., Abdul Azim, A.A., Siripatanadilok, S., Veenin, T., Yahya, A.Z., & Nobuchi, T. (2014). Vessel feature changes as a tool for detecting annual rings in tropical trees. Trees, 28(1), 137-149. doi: 10.1007/s00468-013-0936-3.
  20. Wheeler, E.A., & Baas, P. (1998). Wood identification – a review. IAWA Journal, 19(3), 241-264. doi: 10.1163/22941932-90001528.
  21. Wheeler, E.A., Baas, P., & Gasson, P.E. (Eds.). (1989). IAWA list of microscopic features for hardwood identification (Vol. 10, pp. 219-332). Leiden: IAWA.